Grundig GUSR91DAB - Manual (Page 12)

11
Using the FM Radio
If the DAB Radio is in DAB mode, press the MODE button to select FM mode.
Automatic Tuning
Press
the SCAN button to automatically search for the next available station.
If the reception is poor, try Manual Tuning (see Manual Tuning below) to fine-tune
the station.
Manual Tuning
Rotate
the SELECT button to manually tune through the frequency band.
The frequency will increase or decrease in steps of 0.05 MHz for each turn of the
SELECT button.
Storing FM Presets
You can preset up to 10 FM stations. The procedure for storing and recalling FM
presets is the same as described on page 6.
Time - Allows you to set the time and date manually or update automatically from the
DAB or FM radio broadcast.
Backlight - Allows you to set the backlight time-out from 10, 15, 30 and 60 seconds,
or constantly on.
Factory Reset - this will reset all preset values and begin a full scan for DAB stations.
Software Version - This displays information about the current software installed in
the DAB Radio.
03 Daily Use
1
1
1
2
2
DON’T FORGET!
You may hear background noise as no station has been tuned in. The display will
show the frequency of the FM station.
DON’T FORGET!
When using battery power, the backlight time-out will be set to 10 seconds when
the DAB Radio is switched to standby. You can touch any button on the radio to
turn the backlight on for 10 seconds if you want to view the time.
If you are using mains power, the backlight will remain lit in standby mode.
DON’T FORGET!
If the reception does not improve, try altering the position of the antenna. If the
reception is still poor, scan again to determine whether a stronger signal exists for
the desired frequency.