Before using, Specifications – Freecom Technologies RCS-M2000U User Manual

Page 8

Advertising
background image

BEFORE USING

IMPORTANT: Remove unit from packaging and discard clear, plastic wrapping. Place unit
in its upright position for a minimum of three hours before operating for the first time.

1.

Place unit on a solid, level surface.
Operating this unit on uneven or soft
surfaces may cause vibration, noise, and
possible water leakage from the condensate
tank.

2.

Place unit at least 20" from any walls,
draperies, or other obstructions. Carefully
push the unit on its caster wheels to
desired location.

CAUTION: Do not operate unit without
condensate water tank and air filters
properly in place.

3.

Check that condensate water tank is
properly installed. When properly installed,
the door of the condensate water tank will
be flush with the exterior of the unit.

4.

Check that air filter is clean and properly
installed.

SPECIFICATIONS

Model

Power/Electrical

Cooling Capacity

Input

EER

Requirements

RCS-M2000T

110/115 volt, 60Hz

8000 BTU/h (2300W)

800W

10

RCS-M2000U

230 volt, 50Hz

7500 BTU/h (2300W)

660W

N/A

RCS-M2000B

220/240 volt, 60Hz

8000 BTU/h (2300W)

800W

N/A

8

Advertising
This manual is related to the following products: