Power saver mode, Exiting the power saver mode, Power saver mode 1–11 – HP 3535 User Manual

Page 29

Advertising
background image

1 – 11

Xerox DocuColor 3535 Printer/Copier

Power Saver Mode

Power Saver Mode automatically cuts off the electricity to the
machine if it is left unused for a certain duration. The Power Saver
feature has two modes, a Low Power mode and Sleep mode. The
machine enters the Low Power mode after the preset time has
elapsed if the machine is left unused for a fixed period of time.
The machine then enters the Sleep mode if a further preset time
elapses.

Low Power mode

In this mode, the power to the control panel and fuser unit is
lowered to save power. The display goes out, and the Power
Saver button on the control panel lights. To use the machine,
press the Power Saver button. Power Saver goes out to
indicate that the Power Saver feature is canceled. The default
is 15 minutes.

Sleep mode

In this mode, the power is lowered more than in the Low
Power mode. The display goes out, and the Power Saver
button on the control panel lights. To use the machine, press
the Power Saver button. Power Saver goes out to indicate that
the Power Saver feature is canceled. The Sleep mode default
is 45 minutes after Low Power mode is engaged.

For more information on setting Power Saver mode timers, refer to
the

Machine Administrator

chapter in this guide.

Exiting the Power Saver Mode

The Power Saver mode can be exited in two ways:

By pressing the Power Saver button

By receiving a print job

Advertising