Paper trays, Tray module, Tandem tray module – HP 3535 User Manual

Page 27: All tray modules, Paper trays 1–9

Advertising
background image

1 – 9

Xerox DocuColor 3535 Printer/Copier

Paper Trays

Trays 1,2,3 and 4 are located at the lower front of the printer/
copier. Tray 5 (Bypass) is located on the left side of the printer/
copier.

There are two possible tray configurations on the DocuColor 3535.
Option 1 is a 3-Tray module. Option 2 is a Tandem Tray module.

3-Tray Module

Trays 1 - 4

The 3-Tray Module consists of Trays 1 - 4. Trays 1 - 4 are all
adjustable from 5.5x8.5 in. through 11x17 in. (A5 through A3), and
can each accommodate up to 520 sheets based on paper weight.

Tandem Tray Module

The Tandem Tray Module consists of 4 paper trays.

With the Tandem Tray Module:

Trays 1 and 2

Adjustable from 5.5x8.5 in. through 11x17 in. (A5 through A3), and
can each accommodate up to 520 sheets based on paper weight.

Trays 3 and 4

High capacity paper trays accommodating a total of 2080 sheets,
(8.5x11 in., A4, and B5) based on paper weight.

All Tray Modules

Trays 1 - 4 can feed Transparencies and paper weights 18 lb. to
110 lb. (64 to 220 gsm). The machine automatically detects the
size and orientation of loaded paper. The paper type must be set
in System Setting mode.

Trays 1 - 4 can accommodate approximately 300 striped
transparencies and approximately 450 stripeless transparencies.
Both striped and stripeless transparencies can be used, but
stripeless transparencies are recommended. It is not
recommended that you output more than 20 transparencies at a
time. If your job is larger than 20 pages, use the Transparency
Separators feature.

NOTE:

Transparencies cannot be delivered to the Finisher

(optional accessory). Transparencies cannot be used for 2 Sided
output.

NOTE:

When making copies you can select Transparencies from

Tray 5 (Bypass). If you want to select Transparencies from Trays
1-4, your System Administrator must change the Paper Type
setting in System Settings mode. To select Transparencies for
print jobs, you can select the correct paper type in the printer
driver at the client.

For more information on selecting paper type, refer to the Machine
Administrator chapter.

Advertising