Fault codes, Fault codes 7–21 – HP 3535 User Manual

Page 255

Advertising
background image

7 – 2 1

Xerox DocuColor 3535 Printer/Copier

Fault Codes

This section describes the fault codes that are displayed on the UI
screen and refer you to the DocuColor 3535 User Guide for
information. If the fault code is not specified in the table, refer to
the information with fault code “xxx-xxx” at the end of the table for
instructions.

Fault Code

Cause/Remedy

003-747

Cause

- An illegal print feature combination was set.

Remedy

- Check the print data.

003-761

Cause

- The paper size in the Tray selected by Auto Tray Switching is different

from the paper in the Tray selected in Tray Selection.

Remedy

- Change the paper size for the Tray, or change the paper type

priority setting.

003-795

Cause

- The Reduce/Enlarge ratio exceeds the setting range when the

scanned document is enlarged/reduced to the specified paper size.

Remedy

- Enter the Reduce/Enlarge ratio, or change the paper size.

015-790

Cause

- The scanned document is a copy-prohibited document

Remedy

- See the section entitled Illegal Copies in the front section of the

DocuColor 3535 User Guide to check the types of documents that can be
copied.

016-450

Cause

- The SMB host name has been set twice.

Remedy

- Change the host name.

016-452

Cause

- The IP address has been set twice.

Remedy

- Change the IP address.

016-453

Cause

- Failed to acquire the IP address from the DHCP server.

Remedy

- Set the IP address manually.

016-454

Cause

- Could not acquire the IP address from DNS.

Remedy

- Confirm the DNS settings and IP address acquisition method

setting.

016-735

Cause

- An attempt was made to print a job template while it was being

updated.

Remedy

- Wait a while before instructing printing again.

016-737

Cause

- An error occurred during reading of data from the job template pool

server.

Remedy

- Check the access rights of the directory to which the job template is

stored.

Advertising