HP 3535 - Manual (Page 202)

5 – 2
Xerox DocuColor 3535 Printer/Copier
Trays 1, 2, 3, and 4
Trays 1,2,3 and 4 hold the paper supply for the DocuColor printer/
copier.
Trays 1 - 4 can feed Transparencies and paper weights 18 lb. to
110 lb. (64 to 220 gsm). The machine automatically detects the
size and orientation of loaded paper. The paper type must be set
in System Setting mode.
Trays 1 - 4 can accommodate approximately 300 striped
transparencies and approximately 450 stripeless transparencies.
Both striped and stripeless transparencies can be used, but
stripeless transparencies are recommended. It is not
recommended that you output more than 20 transparencies at a
time. If your job is larger than 20 pages, use the Transparency
Separators feature.
NOTE: Transparencies cannot be delivered to the Finisher
(optional accessory). Transparencies cannot be used for 2 Sided
output.
NOTE: When making copies you can select transparencies from
Tray 5 (Bypass). If you want to select transparencies from Trays 1-
4, your System Administrator must change the Paper Type setting
in System Settings mode. To select transparencies for print jobs,
you can select the correct paper type in the printer driver at the
client.
3-Tray Module Trays 1 through 4 can accommodate transparencies and an
assortment of and standard paper sizes, from 5.5x8.5 through
11x17 inch, and A5 through A3. Trays 1 and 2 have width and
length adjustment guides that can be adjusted if the paper size in
the tray needs to be changed.
Tandem Tray Module Trays 1 and 2 can accommodate transparencies and an
assortment of standard paper sizes, from 5.5x8.5 through 11x17
inch, and A5 through A3. Trays 1 and 2 have width and length
adjustment guides that can be adjusted if the paper size in the tray
needs to be changed. Trays 3 and 4 can accommodate 8.5x11
inch, A4, or B5 paper. Trays 3 and 4 can feed Transparencies and
paper weights 18 lb. to 110 lb. (64 to 220 gsm).